DRock Posted March 21, 2013 Share Posted March 21, 2013 I recently switched my SA GPX taper line for a SA Sharkskin GPX taper. Today i fished with it and WOW i should have used this line earlier. The only negative is the sound it makes through the guides and the gary (minus the r) colors they come in. The positives are it picks up nicely off the water and i can cast with it much smoother. Anyone else use these sharkskin lines? What do you think? Quote Link to comment Share on other sites More sharing options...
ÜberFly Posted March 21, 2013 Share Posted March 21, 2013 I have the textured and it's pretty much the same as the regular GPX but much louder - not sure if it's annoying to me yet or not... Only reason I bought it is I got a deal on it! Quote Link to comment Share on other sites More sharing options...
FlyingDutchman68 Posted March 21, 2013 Share Posted March 21, 2013 I picked up some up last summer and fell in love with it right away. Eventually you will get used to hearing the line sing. I read somewhere that because of the texture of the line apparently the "scales" will wear out your guides quicker than a normal line would. I don't know if there is any truth to that. Quote Link to comment Share on other sites More sharing options...
lad Posted March 21, 2013 Share Posted March 21, 2013 I have it on a couple of reels and it does seem to sit higher in the water. Takes a bit of getting used to but I do enjoy the line. Not cheap though. Is the green (gary-r)? I have it and a GF. lol Quote Link to comment Share on other sites More sharing options...
DonAndersen Posted March 21, 2013 Share Posted March 21, 2013 Got a new sharkskin 2 years ago. Does it cast further that the Cortland 444 - not so I'd notice, it is noisy and you soon learn not to fight a decent fish by running the lines trough your hands. You'll get rope burns. Won't buy another. Don Quote Link to comment Share on other sites More sharing options...
kevbine Posted March 21, 2013 Share Posted March 21, 2013 I switched most of my lines from Rio Golds to SA Mastery Textured, which is a toned down version of Sharkskin. Not as loud, expensive or hard on your rod guides and hands. Love it! Super slick, floats nice, doesnt coil, these lines dominate. I am sure i'd like the full on Sharkskin as well though. If you're getting one for a really stiff and fast rod, get the GPX taper as its a half line heavier. If you love the action your rod has with a regular line then get the Trout taper. I've only really seen these in two colors, bright green, which is high vis and may help in nymphing, and a stealthy tan... Quote Link to comment Share on other sites More sharing options...
bcubed Posted March 21, 2013 Share Posted March 21, 2013 I've used about every fly line out there from the big manufacturers (Rio, Airflo, SA, Orvis), and kept ending back up at the Sharkskin as the go to. However, I have to say that the new Orvis 3D (which is made by SA anyway, so really it's a sharkskin with a different taper) may well be the most versatile and best line i've ever had. Quote Link to comment Share on other sites More sharing options...
SilverDoctor Posted March 21, 2013 Share Posted March 21, 2013 Just a tip, yes it will wear down cheap fly rod guides with a lot of casting, but like all lines this one picks up much more grit and surface matter. Clean your fly lines regulary and you're gold. Quote Link to comment Share on other sites More sharing options...
Muffin Posted March 21, 2013 Share Posted March 21, 2013 Little off topic from the original post, when you say clean your fly lines how do you go about that? Quote Link to comment Share on other sites More sharing options...
Pipestoneflyguy Posted March 21, 2013 Share Posted March 21, 2013 I've had the SA sharkskin on my helios for two seasons. (hetero-green). Haven't seen anything that I would call abnormal wear in the guides or anything like that. Casts and floats very well. Shoots amazingly well, even on the short cast. I don't particularly like the textured feel in my hand but I have gotten used to it over time. Is a ball of fun shooting a long cast, when you have a barren open shore, and tons of room for some long double hauling, and you get everything dialed in, it is impressive what you can do with it. Only complaints are that it is harder to clean, and the noise just doesn't jive well with a silent evening conditions. I would be inclined to try one of the toned down versions next time. Quote Link to comment Share on other sites More sharing options...
bjbailey Posted March 21, 2013 Share Posted March 21, 2013 I have the sharkskin on my 6 weight. It does cast like a dream, and I especially love it paired with a fast action rod. I've had a number of boat companions jokingly complain about the line noise. I still find it annoying sometimes too. Overall though its a great line. Quote Link to comment Share on other sites More sharing options...
lad Posted March 21, 2013 Share Posted March 21, 2013 I would really like to see someone come on to this forum and say they needed to replace the worn guides on their rod. phhht. 1 Quote Link to comment Share on other sites More sharing options...
monger Posted March 21, 2013 Share Posted March 21, 2013 I replaced 2 sets of guides on a old rod....before sharkskin came around. Not expensive guides, but they did wear out Quote Link to comment Share on other sites More sharing options...
Roast Posted March 21, 2013 Share Posted March 21, 2013 Little off topic from the original post, when you say clean your fly lines how do you go about that? You can clean them by soaking them in a warm water and mild dish soap mixture. I will then pull the line through a soft cloth and then let the line dry. Apply some fly line dressing according to the instructions on the package and your good to go. It's a great thing to do on days like today:) Quote Link to comment Share on other sites More sharing options...
Jayhad Posted March 21, 2013 Share Posted March 21, 2013 Little off topic from the original post, when you say clean your fly lines how do you go about that? this http://www.rioproducts.com/fly-fishing-gear/line-care/agentx-line-cleaning-kit/ Quote Link to comment Share on other sites More sharing options...
Muffin Posted March 21, 2013 Share Posted March 21, 2013 Perfect thanks a lot Roast and Jayhad. Quote Link to comment Share on other sites More sharing options...
kevbine Posted March 21, 2013 Share Posted March 21, 2013 I actually dont think you're supposed to clean textured lines the same as the smooth Rio lines. SA sells a pad, maybe a bit like scotchbrite ( a 3m product!) that you run the line through. The friction releases mini silicone balls from the line and makes it slick again... Soaking it in soapy water wouldnt hurt though. 1 Quote Link to comment Share on other sites More sharing options...
Pipestoneflyguy Posted March 22, 2013 Share Posted March 22, 2013 Where can a fella pick up one of those kevbine ? Quote Link to comment Share on other sites More sharing options...
bcubed Posted March 22, 2013 Share Posted March 22, 2013 http://www.countrypleasures.com/store/contents/en-ca/p684.html Use the grey side for cleaning the line, the other side for application of the line goo Quote Link to comment Share on other sites More sharing options...
ÜberFly Posted March 22, 2013 Share Posted March 22, 2013 Yeah I have found that the spongy part of the pad "for application of the line goo" doesn't last all that long... Quote Link to comment Share on other sites More sharing options...
bcubed Posted March 22, 2013 Share Posted March 22, 2013 Apply, don't push so hard that it falls apart! Quote Link to comment Share on other sites More sharing options...
ÜberFly Posted March 22, 2013 Share Posted March 22, 2013 I guess I don't know my own strength Brent! LoL Quote Link to comment Share on other sites More sharing options...
Chadillac Posted March 22, 2013 Share Posted March 22, 2013 You can clean them by soaking them in a warm water and mild dish soap mixture. I will then pull the line through a soft cloth and then let the line dry. Apply some fly line dressing according to the instructions on the package and your good to go. It's a great thing to do on days like today:) When he says mild, it means MILD. Dish soap is a degreaser and if mixed too strong will dry out your line making it prone to cracks. If you can, use even a bar of soap mixed lightly with water. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.