SilverDoctor Posted November 9, 2012 Share Posted November 9, 2012 Excellent build, looks like it will be a gem on pothole lakes. Congratulatons Quote Link to comment Share on other sites More sharing options...
Guest 420FLYFISHIN Posted November 9, 2012 Share Posted November 9, 2012 that is wicked high in the water, looks amazing as always Quote Link to comment Share on other sites More sharing options...
darrinhurst Posted November 11, 2012 Share Posted November 11, 2012 Awesome work Mike! Looks great! Quote Link to comment Share on other sites More sharing options...
Tungsten Posted December 21, 2012 Author Share Posted December 21, 2012 Playing with some bench supports, This is a 1/4" sheet of foam sucking down a layer of glass on each side,i can then cut out my pieces. Built a jig to hold the 2 pieces at a 90 while i fillet and tape together. They were a little long so I cut offf 8" and gave them a test.Pretty strong considering how light they are. Access hole cut, alligned ready for glue. Quote Link to comment Share on other sites More sharing options...
Tungsten Posted December 21, 2012 Author Share Posted December 21, 2012 Working on the rowers seat, Done, Quote Link to comment Share on other sites More sharing options...
RedBeard Posted December 21, 2012 Share Posted December 21, 2012 Very cool. Love the updates Quote Link to comment Share on other sites More sharing options...
darrinhurst Posted December 21, 2012 Share Posted December 21, 2012 Awesome job mike! Looks amazing! Quote Link to comment Share on other sites More sharing options...
Tungsten Posted December 28, 2012 Author Share Posted December 28, 2012 Bench build,just using BB ply left over from my first build.Not concerned about weigh as this just gets tossed in the truck before i load the boat on top. had to lower it a bit as it ended up a little high, Anchor cleat to hold the scotty thing, this brings you upto date,right now working on fishing seat . Quote Link to comment Share on other sites More sharing options...
Muffin Posted December 28, 2012 Share Posted December 28, 2012 Awesome looking boat. I imagine it handles great with the size. With a boat smaller like that would you get pushed around more? My buddy had an old wooden drift boat we fixed up but it was a tank, especially with 3 guys averaging about 250 lbs/person. Quote Link to comment Share on other sites More sharing options...
darrinhurst Posted December 30, 2012 Share Posted December 30, 2012 She's a thing of beauty Mike! Quote Link to comment Share on other sites More sharing options...
Tungsten Posted December 30, 2012 Author Share Posted December 30, 2012 Awesome looking boat. I imagine it handles great with the size. With a boat smaller like that would you get pushed around more? My buddy had an old wooden drift boat we fixed up but it was a tank, especially with 3 guys averaging about 250 lbs/person. Not really sure but with a big guy like me up front it'll blow us around.If the winds that bad then the minncotta rows Quote Link to comment Share on other sites More sharing options...
bowbonehead Posted January 5, 2013 Share Posted January 5, 2013 Awesome build you have talented hands! Quote Link to comment Share on other sites More sharing options...
Tungsten Posted January 28, 2013 Author Share Posted January 28, 2013 I found a little larger base that my 3/4" pole seat would fit into.It just has a small adaptor. added in some oar locks Quote Link to comment Share on other sites More sharing options...
Tungsten Posted January 28, 2013 Author Share Posted January 28, 2013 2 Quote Link to comment Share on other sites More sharing options...
agbff Posted January 28, 2013 Share Posted January 28, 2013 This is really radical, some great work dude! Quote Link to comment Share on other sites More sharing options...
Mitchell0724 Posted January 28, 2013 Share Posted January 28, 2013 That is a beautiful little boat. Very nice! Quote Link to comment Share on other sites More sharing options...
fishinglibin Posted January 28, 2013 Share Posted January 28, 2013 Nice Work Quote Link to comment Share on other sites More sharing options...
Tungsten Posted January 29, 2013 Author Share Posted January 29, 2013 Thanks guys,i ordered some polyurethane bed liner with rubber chunks in it for the inside floor.Should have it this week.Out side will get painted after that. Can't wait to start doing some floats. Quote Link to comment Share on other sites More sharing options...
pokerfish Posted January 29, 2013 Share Posted January 29, 2013 If you are looking for testimonials, I am definitely available to give it a ride. T Quote Link to comment Share on other sites More sharing options...
Gaffer Posted January 29, 2013 Share Posted January 29, 2013 Sick Mike. What did you build the oar lock blocks out of? UHMW or something? Andrew Quote Link to comment Share on other sites More sharing options...
Tungsten Posted January 29, 2013 Author Share Posted January 29, 2013 Sick Mike. What did you build the oar lock blocks out of? UHMW or something? Andrew Just plywood sprayed with truck bedliner. Quote Link to comment Share on other sites More sharing options...
Tungsten Posted February 25, 2013 Author Share Posted February 25, 2013 managed to get some time to sand and fill all the bumps and lumps,to break up the interior i painted some spots a different color. Then on with the bedliner, Next the outside,not sure yet what color. 1 Quote Link to comment Share on other sites More sharing options...
Castuserraticus Posted February 25, 2013 Share Posted February 25, 2013 Just WOW! Quote Link to comment Share on other sites More sharing options...
troutlover Posted February 26, 2013 Share Posted February 26, 2013 Pink Quote Link to comment Share on other sites More sharing options...
darrinhurst Posted February 26, 2013 Share Posted February 26, 2013 That's so friggin awesome, I just don't have the words. Well done Mike! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.