creekside Posted January 7, 2015 Share Posted January 7, 2015 need a new pair of wet wading boots. Do not like to use my wader boots, just to sloppy of a fit. Need something with a fairly tight fit without neo socks, lots of ankle support and lite as possible, thanks in advance ray Quote Link to comment Share on other sites More sharing options...
bcubed Posted January 7, 2015 Share Posted January 7, 2015 I'd suggest skipping the boots and going with a Simms sandal, but that's just me Quote Link to comment Share on other sites More sharing options...
creekside Posted January 7, 2015 Author Share Posted January 7, 2015 have tried scandals, need the ankle support due to a past injury. Quote Link to comment Share on other sites More sharing options...
bcubed Posted January 7, 2015 Share Posted January 7, 2015 I'd suggest finding a pair of Simms riversheds, and size them down to fit right without a wafer. Bring what you'd normally wear to a fly shop and figure it out. Could be a bit tough to go no neoprene just due to the width of wading boots Quote Link to comment Share on other sites More sharing options...
bigalcal Posted January 7, 2015 Share Posted January 7, 2015 Have you tried adding an insole to your current boots? This would fill the gap that was taken up by the neoprene from your waders. I wear Cloudveil wading boots (since discontinued) and they came with an insole for wet wading. Might be worth a try. Quote Link to comment Share on other sites More sharing options...
BurningChrome Posted January 7, 2015 Share Posted January 7, 2015 Take a look at canyoneering shoes. They're made to be amphibious and usually have sticky soles. I haven't used them myself but looked into them when I was looking for a new wet wading sandal. One word of warning is that some of them are pretty fugly looking. 1 Quote Link to comment Share on other sites More sharing options...
fishpro Posted January 7, 2015 Share Posted January 7, 2015 If you have a pair of boots that fit well with your waders, consider the Simms wading socks that are made with the same thickness of neoprene as the booties of waders. 1 Quote Link to comment Share on other sites More sharing options...
eagleflyfisher Posted January 8, 2015 Share Posted January 8, 2015 need a new pair of wet wading boots. Do not like to use my wader boots, just to sloppy of a fit. Need something with a fairly tight fit without neo socks, lots of ankle support and lite as possible, thanks in advance ray I'm in the same boat, I have used the old orvis mid ankle, felt bottom with a short neo sock.they were ok. Looked at some different sandles but don't want mud etc coming in through the sides. Typically go with the simms neo socks and wading boots. These are good but heavy , hot and must wash after use or they get smelly. Have heard river sheds were ok,. Light, durable easy on & off would be great. Quote Link to comment Share on other sites More sharing options...
kritofr Posted January 8, 2015 Share Posted January 8, 2015 Take a look at the Simms Vapor boot. Lighter than the Riversheds with good ankle support. Quote Link to comment Share on other sites More sharing options...
Vagabond Posted January 8, 2015 Share Posted January 8, 2015 Converse HighTops,lol.....seriously though,why not?Wet waded in sneakers/ jeans for most of my youth,pretty sure it still works....in fact,probly caught more trout before I was 20yo then I have since or ever will again.....siggggghhhhhh Quote Link to comment Share on other sites More sharing options...
darrinhurst Posted January 8, 2015 Share Posted January 8, 2015 I just use my wading boots with a Simms neoprene sock in it. It really helps keep your feet warm in those cold mountain streams and the support is clearly there too. Quote Link to comment Share on other sites More sharing options...
pokerfish Posted January 8, 2015 Share Posted January 8, 2015 last summer I picked up a pair of Simms riprap wading shoes. Wore them with neoprene socks. They were great. Only drawback is that they wont accept studs (despite what the salesman at the store said) However, the rubber is indeed grippy on the oldman slime, and they are good to walk the rocks and hillsides with. Quote Link to comment Share on other sites More sharing options...
jgib01 Posted January 8, 2015 Share Posted January 8, 2015 I bought my first pair of wading boots at Canadian Tire, on sale for under $50. They were actually a nice lightweight boot, with decent ankle support and fairly good upper construction. They offered pretty good traction with a soft rubber sole, but that same soft sole unfortunately didn't stand up all that well. I gave them away to a buddy when I bought my first "real" pair of boots in October after deciding I'm in this thing for the long haul. In hindsight, I maybe should have kept them to wear as an occasional wet-wader. Combined with the MEC neoprene sock that Pete (Überfly) put me on to, I think they would have worked well that way. Quote Link to comment Share on other sites More sharing options...
alan2 Posted January 13, 2015 Share Posted January 13, 2015 I use my regular boots and wear 2 pairs of MEC neoprene socks inside. Size large and X-large over those. Works fine, foot doesn't move around. Turn'em inside out to dry and then wear them that way next trip, so alternate them. Quote Link to comment Share on other sites More sharing options...
Claretuam Posted January 13, 2015 Share Posted January 13, 2015 My fly line always catches in my wading boots even with gravel guards so I mostly wear scuba boots neoprene with grip soles, very cheap from a supermarket. Great in the boat. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.