ÜberFly Posted July 18, 2014 Posted July 18, 2014 Any woodworkers on here? I had to repair a leg on solid teak bookshelf and had to do a bit of sanding. What can I use to restore the colour?! Oil? If so, what kind and where can I purchase?! If not, what? Thanks Peter Quote
eagleflyfisher Posted July 18, 2014 Posted July 18, 2014 Color because of age will be tough to match , old will have aged & what you sand will look new. Time will do the job. If the teak has a clear finish then I would buy a small quart of neutral stain ( clear ) . I can give you this or purchase anywhere they sell stain. Home Depot will do. If you need to build up some finish buy a spray bomb of polyurethane probably in semi gloss and build up some light coats. Quote
Tungsten Posted July 18, 2014 Posted July 18, 2014 I would do a test on a spot that's not visable maybe the back or bottom.If its a light color your after then the repair area should be sanded with a fine grit paper.If you sand with a courser grit it will go darker. Quote
ÜberFly Posted July 18, 2014 Author Posted July 18, 2014 Thanks guys. Went to see the folks at Black Forest. Unfortunately they didn't have what I needed. Steered me towards Home Depot and Rona. Teak oil. So far so good. Cheers, P Quote
DonAndersen Posted July 28, 2014 Posted July 28, 2014 Peter, Alcohol pens work great for touch ups. Acetone will lessen colour for blending. Various dyes available from Lee Valley Tools are also an option. Many of them are water soluble making blending into existing colour easy. Lots of options. Don Quote
Rich Posted July 29, 2014 Posted July 29, 2014 Teak oil is the way to go. I recomend coating the hole shelf for a uniform finish. If it has not been done for some time the first coat will soak in fairly fast ( a day or so). You should oil the teak every year or to to help keep color and preserve the wood. Rich Quote
ParsonsBruce Posted August 1, 2014 Posted August 1, 2014 I also had the same issue with a lawyers bookcase that I inherited from my grandfather. What I did was finish the repairs then I sent the whole thing out to get "dipped and stripped". After I finished with a clear polyurethane and currently it's holding prime residence in our dining room and looks like its 100 years old. May concern is matching what's been done in the past (Teck oil)? If this is something close to your heart you may consider starting from scratch like me. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.