Tungsten Posted March 19, 2014 Share Posted March 19, 2014 I've built a full size model of 17' drift boat,56" wide at the floor and a 76" beam at the oar locks.looks pretty darn big to me.This would be similar to Hyde's 16'10" model.Has anyone rowed the bigger boats?If so did you notice the extra weight/size? I've only rowed the 15' model so was wondering if there is a lot more effort required to row the 17' models. Quote Link to comment Share on other sites More sharing options...
Nick0Danger Posted March 20, 2014 Share Posted March 20, 2014 It will row fine. I've rowed a large boat with brunise in it and it was fine a bit more effort but not bad. Quote Link to comment Share on other sites More sharing options...
WyomingGeorge Posted March 20, 2014 Share Posted March 20, 2014 Rowing effort will depend far more on the amount of rocker in the design. Lots of rocker means a middle that hangs low in the water, meaning you are always rowing "uphill" in either direction. Less rocker (although it has disadvantages, such as crashing into rather than smoothly taking waves), means faster rowing...as long as the boat isn't over-loaded. Which brings me to point 2: a longer boat should row easier because the overall draft should be less. You'll be especially happier to have the larger hull when you put in three relatively large guys. When I was in the market for my driftboat I agonized over size, and I've been continuously happy to have gotten the Clack 16 Low Profile ever since. Its overall length is 16' 10", very close to your boat. I enjoy rowing it solo, with one passenger or fully loaded. Quote Link to comment Share on other sites More sharing options...
WyomingGeorge Posted March 20, 2014 Share Posted March 20, 2014 As well, a big part of ease-of-rowing is good tracking. One can waste a lot of effort on correcting undesired course changes. I recall renting and hating a high-sided 14' Clack, which felt like an unguided cockleshell in even a moderate wind. Honestly half my energy went into trying to control the direction rather than moving it in the direction I wanted to go. A longer boat should, generally, track better, although the best tracking comes from subtleties of hull design that various manufacturers claim to have the edge in. Quote Link to comment Share on other sites More sharing options...
Tungsten Posted March 20, 2014 Author Share Posted March 20, 2014 Well i do have a parallel spot in the floor at about 50" long, trying to keep the rocker down in the bow but with a pointed stem the sides need some cupping along the bottom to reduce the rocker.Stern rocker will be gradual then turn sharply closer to the transom similar to what Hyde has.This should keep the boat higher in the water. Thanks for the help. 1 Quote Link to comment Share on other sites More sharing options...
WyomingGeorge Posted March 20, 2014 Share Posted March 20, 2014 You're most welcome, best of luck with the project. I quail in fear at the idea of self-building a boat, and admire those who do. I'm sure the satisfaction of floating in one's very own boat will be intense, similar to catching fish on self-tied flies. Quote Link to comment Share on other sites More sharing options...
troutlover Posted March 20, 2014 Share Posted March 20, 2014 Im looking forward to pictures of another one of your builds. 1 Quote Link to comment Share on other sites More sharing options...
darrinhurst Posted March 20, 2014 Share Posted March 20, 2014 Im looking forward to pictures of another one of your builds. x2 Quote Link to comment Share on other sites More sharing options...
fishinglibin Posted March 20, 2014 Share Posted March 20, 2014 X3 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.