ÜberFly Posted June 16, 2012 Posted June 16, 2012 So what is the "proper" way to put the sections in a sock/tube? Thin end down or thin end up?! I recently purchased a Winston Boron IIIx and noticed on one of the you tube videos that they were putting the thin end down? Seems that it would be safer if the thin sections were up?! Is there a "correct" way (i.e., lessens the chances of breaking a tip) or does it matter? P Quote
ÜberFly Posted June 17, 2012 Author Posted June 17, 2012 So now that we got the peanut gallery out of the way... Quote
Guest Wrecker Posted June 17, 2012 Posted June 17, 2012 So now that we got the peanut gallery out of the way... Honestly dude, Your putting the rod in a tube. Why in the world do you think it would matter which direction you put it in? I felt a few brain cells explode answering this post... Quote
murray Posted June 17, 2012 Posted June 17, 2012 Peter, I understand your concern. Personally, I insert the thick end in the sock first. I suspect you might do the same. When removing the sections from the sock, I pull the sock down just enough to expose the tip of the top section. My concern is that it is easy to snag the thin piece at the end and breaking it. I've tried putting the tip section down so that the thin end is at the bottom of the sock but it is just as easy to snap the end that way as well. I guess what I'm really saying is, either way works for me, just be carefull with the tip section. Also, at the end of the day, don't get lazy and leave the rod assembled. I broke the tip off a very expensive rod by trying to put it in the cargo section of the motor home. Thought I was being smart untill I heard the snap. 9 ft. Rods don't fit in 8 ft. Wide cargo bins. Take care Peter Murray Quote
TerryH Posted June 17, 2012 Posted June 17, 2012 I do it just the way they are packed at the factory -- Sages at least. The thickest sections (i.e. the bottom two sections) are alternated with the thinnest two (i.e. the top two sections) when you put them in the sock. The thick sections go in thin end first, the thinner sections go in fat end first. This accomplishes two things. You lessen the risk of breaking the thin sections, while there is minimal risk of breaking of breaking the thick sections. Also, you don't end up with all the biggest line guides at one end of the sock. Makes sense? Terry Quote
nebc Posted June 17, 2012 Posted June 17, 2012 I do it just the way they are packed at the factory -- Sages at least. The thickest sections (i.e. the bottom two sections) are alternated with the thinnest two (i.e. the top two sections) when you put them in the sock. The thick sections go in thin end first, the thinner sections go in fat end first. This accomplishes two things. You lessen the risk of breaking the thin sections, while there is minimal risk of breaking of breaking the thick sections. Also, you don't end up with all the biggest line guides at one end of the sock. Makes sense? Terry What Terry said... Quote
Guest Dust1n Posted June 17, 2012 Posted June 17, 2012 I stiI always stick the butt section of the rod peices facing downward except on the handle peice Quote
ÜberFly Posted June 17, 2012 Author Posted June 17, 2012 I'm surprised you have any left? I felt a few brain cells explode answering this post... Quote
troutlover Posted June 18, 2012 Posted June 18, 2012 I tried to click on the coupon but it didn't work ............must have already been used DAMMIT! i need to know is a Zebra white with black stripes or is it Black with white! Quote
dutchie Posted June 18, 2012 Posted June 18, 2012 I tried to click on the coupon but it didn't work ............must have already been used DAMMIT! i need to know is a Zebra white with black stripes or is it Black with white! nice seeing you the river troutlover , watched your bud in action from other side , and he's a working machine , nice , was a good show for me and my client , Quote
ironfly Posted June 18, 2012 Posted June 18, 2012 I stiI always stick the butt section of the rod peices facing downward except on the handle peice X 2. Quote
SilverDoctor Posted June 21, 2012 Posted June 21, 2012 Personally and purely out of habit I put my fly rod sections into tubes narrow end first. But if you have a good quality tube that is well padded on both ends it really doesn't matter. I love tubes that have individual cloth compartments for the sections and well padded ends. Better in my opinion than a separate sleeve, easier to pop the sections in. I do make sure on all my rod tubes that there is enough padding at each end so the sections do not move once sealed in the tube. I often add padding on my older rod tubes. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.