Muffin Posted July 23, 2013 Posted July 23, 2013 Hello while fishing on Sunday the felts on the bottom of my right boot came half off. I fished the rest of the day but it was flapping on the bottom like a dogs tongue. I am planning to buy some sort of glue to put the felt back on and then wrap some fishing line around it to hold the felt in place while the glue sets. I am wondering has anyone had any experience with this and if so what sort of glue/epoxy did you use? Thank You, Russ Quote
Sean84 Posted July 23, 2013 Posted July 23, 2013 Theres a product call shoe goo which might work but I would go with marine epoxy. 1 Quote
screaminreel Posted July 23, 2013 Posted July 23, 2013 Re-felted my boots with Gorilla glue and works like a charm. 1 Quote
Muffin Posted July 23, 2013 Author Posted July 23, 2013 Re-felted my boots with Gorilla glue and works like a charm. Do you recall where you picked that up? Quote
Willshire59 Posted July 23, 2013 Posted July 23, 2013 The fishing hole has a water proof contact cement that I have used couple of times and it works great. Just give everything a light sand and apply contact cement to both surfaces and let dry and stick to each other.. When I stuck them toghter I then clamped it over night was good to go and that was last season. 1 Quote
Muffin Posted July 23, 2013 Author Posted July 23, 2013 Perfet thanks guys. I think I will stop at home depot and grab some gorilla glue and sandpaper. Probably use some fishing line and a set of chains to replace the clamps as I have them available. Thanks a lot for the tips everyone. Quote
DonAndersen Posted July 23, 2013 Posted July 23, 2013 Lepages regular contact cement. Most hardware stores carry it. Do not get other types of contact cement - the glue is miscible in water.http://www.lepageproducts.com/ProductDetail.aspx?pid=90 Don 1 Quote
Sean84 Posted July 24, 2013 Posted July 24, 2013 I had a friend use gorrila glue and it never lasts in the water. 1 Quote
alan2 Posted July 24, 2013 Posted July 24, 2013 The correct kind of glue that comes with the felt resole kits is called Barge cement and is available at Tandy Leather on Macleod trail or at MEC. It helps to have the surfaces as clean as possible, sand the soles if possible. I've resoled my own three times 1 Quote
Muffin Posted July 24, 2013 Author Posted July 24, 2013 That is awesome information guys. Thanks for all the tips. I cleaned them real nice tonight so I need to let them dry. I also stopped and got two clamps, some sandpaper and some gorilla glue. Given that I have the Gorilla Glue I will probably give it a shot first. I usually don't fly fish during the winter so it may be a good solution. If it isn't then I will probably go grab some Barge cement like you suggested alan2. Thanks again for posting the video. And to everyone else for their opinions and experiences. Quote
screaminreel Posted July 24, 2013 Posted July 24, 2013 Do NOT clamp tightly with Gorilla glue. It needs to expand. The reason it fails for many is they don't follow the instructions properly. Can't blame the glue for lack of common sense. Gorilla glue is widely used in boat building now UNDER the water line. Quote
Muffin Posted July 24, 2013 Author Posted July 24, 2013 Okay perfect, thank you for the tip. I was going to read the directions but I will make sure the clamp is just tight enough to ensure full contact between the felt and the sole. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.