gaveryco Posted April 13, 2012 Share Posted April 13, 2012 Hey guys, I was wondering if anyone has tied with fish skulls and if so have you had any problems with them? Ive been tying a few articulated minnow patterns (bottom pic whitefish=grey/white) with them. When I tested them out they roll over onto their sides instead of riding true(hook point down) in the water. From my understanding the fish skulls should eliminate the problem, having 70% of mass below hook shank, hence why I paid $ for them lol. I am curious if its something in the construction of the fly that may be altering the mechanics of it... Any suggestions would be greatly appreciated. The other pics are circus peanuts in various colours. Geordon Quote Link to comment Share on other sites More sharing options...
Guest 420FLYFISHIN Posted April 13, 2012 Share Posted April 13, 2012 thats a pickle, have to tryied them on other style streamers to see if it has the same problem? Quote Link to comment Share on other sites More sharing options...
muha Posted April 13, 2012 Share Posted April 13, 2012 Fish skulls have "keel" , keel should be on bottom side. By the looks of your picture i think you tied them in upside down. Never had problems with them, apart from finding small eye hooks that work with them. Quote Link to comment Share on other sites More sharing options...
jksnijders Posted April 13, 2012 Share Posted April 13, 2012 Yup. They're upside down.. Quote Link to comment Share on other sites More sharing options...
gaveryco Posted April 14, 2012 Author Share Posted April 14, 2012 No I haven't tried with another pattern.....didn't want to waste as their quite expensive, thats a good thought though.. 100% not upside down, the keel is on the bottom. Quote Link to comment Share on other sites More sharing options...
gaveryco Posted April 14, 2012 Author Share Posted April 14, 2012 Same fly but olive/white, same problem... Quote Link to comment Share on other sites More sharing options...
maxwell Posted April 14, 2012 Share Posted April 14, 2012 its not the skully its the materials.. either your materials are are off centre or you have too much on top or bottom... i find some flies if i get to much material underneithe and not enough on top the buoyance of the material makes the fly flip the wrong way... try pulling out some marabout too get equal mass top and bottom and at the same time making it centred.. probably have too much marabout leaning left or right typically the direction in with u wrap your thread causing everything to shift away from you.. hope that helps! Quote Link to comment Share on other sites More sharing options...
jksnijders Posted April 14, 2012 Share Posted April 14, 2012 Post a pic of the top of ur streamer. Quote Link to comment Share on other sites More sharing options...
gaveryco Posted April 14, 2012 Author Share Posted April 14, 2012 Post a pic of the top of ur streamer. Quote Link to comment Share on other sites More sharing options...
jksnijders Posted April 14, 2012 Share Posted April 14, 2012 Used a ton of fish skulls, never had a streamer ride upside down. Can't tell by your pic but where the weight is centered in the skull is quite obvious when you look from the back. The first pic is shown sitting properly in relation to hook bend. Phone pics obviously lacking quality, hope this helps. Quote Link to comment Share on other sites More sharing options...
muha Posted April 14, 2012 Share Posted April 14, 2012 If it is not upside down.... Maybe try straight eye, or up eye hook istead of what you're using now seems to be a down eye, that should solve the problem. Quote Link to comment Share on other sites More sharing options...
gaveryco Posted April 14, 2012 Author Share Posted April 14, 2012 Used a ton of fish skulls, never had a streamer ride upside down. Can't tell by your pic but where the weight is centered in the skull is quite obvious when you look from the back. The first pic is shown sitting properly in relation to hook bend. Phone pics obviously lacking quality, hope this helps. Thanks man. I have them oriented properly, and they dont ride upside down, they just flop over onto their sides... I removed some of the marabou like max suggested and I'll see how that goes. Thanks for you help. Quote Link to comment Share on other sites More sharing options...
ironfly Posted April 25, 2012 Share Posted April 25, 2012 If it is not upside down.... Maybe try straight eye, or up eye hook istead of what you're using now seems to be a down eye, that should solve the problem. x 2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.