headscan Posted October 5, 2009 Posted October 5, 2009 A review of Rio's new Skagit Flight line: http://blog.deneki.com/2009/10/rio-skagit-flight-review.html Sounds a little too close to the Airflo Compact Skagit (of which I already have a few) for me to spend any money on. Quote
maxwell Posted October 6, 2009 Posted October 6, 2009 check out the taper dude! pretty cool! i will be checking em out forsure!!! Quote
headscan Posted November 24, 2009 Author Posted November 24, 2009 Tried one today and I liked it. Quote
Brookie2 Posted November 24, 2009 Posted November 24, 2009 Tried one today and I liked it. Thats good to hear, as I ordered one as well. Quote
headscan Posted November 25, 2009 Author Posted November 25, 2009 Did a head to head comparison today with the Rio Skagit Flight and Airflo Compact Skagit on a Z-Axis 5126. The Rio was 425 grains and the Airflo was 420. Used a 15 foot Rio type 3 tip on both and a couple feet of 10lb Maxima. The Flight doesn't turn over big flies as well as the Compact but I was able to get around the same distance out of both heads. Quote
SilverDoctor Posted November 25, 2009 Posted November 25, 2009 Did a head to head comparison today with the Rio Skagit Flight and Airflo Compact Skagit on a Z-Axis 5126. The Rio was 425 grains and the Airflo was 420. Used a 15 foot Rio type 3 tip on both and a couple feet of 10lb Maxima. The Flight doesn't turn over big flies as well as the Compact but I was able to get around the same distance out of both heads. Nice to know the difference, thansk for posting. heard the flight was a good line but the Airflow has some great qualities also. Quote
jack Posted November 30, 2009 Posted November 30, 2009 Acquired a couple of Airflo Skagits last year, liked them so much I've set up all my two handers with them. The only thing that I do, and I've mentioned the trick before, is to lighten the "load" a bit, I use 4 to 7' of loop/loop T-14 with a 30lb mono "cheater" between the head and the T-14 sink tip. Not as heavy to cast and sinks much better in fast water, the line floats and the small diameter mono cuts through the faster flowing top water, allowing the T-14 to get the fly down near the bottom. Much easier to pick up, prior to setting the anchor and forming the "D", than a long, 15' sink tip. j Quote
headscan Posted November 30, 2009 Author Posted November 30, 2009 Jack, doesn't that setup cause extra hinging during the cast? Or is the mono stiff enough that it isn't an issue? I've been using the Compact Skagits for a while now as well with the 15' Rio tips and haven't found any problems, though I haven't tried them with anything heavier than a type 6. Quote
jack Posted November 30, 2009 Posted November 30, 2009 No, not that is noticeable. It's a NW US trick that they use on coastal rivers, where lots of times the force of the flow will overwhelm the ability of the rod to pick up a long weighted tip from the water(or the force will hydraulically lift it, negating the purpose of the weight). j Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.