Jump to content
Fly Fusion Forums

Roast

Members
  • Posts

    255
  • Joined

  • Last visited

  • Days Won

    8

Posts posted by Roast

  1. I'm really liking my new glass rod (epic 686), if you would like to try it send me a pm. There is a field right by my house where you can make some casts. As you can see from the various responses, some guys like a fast rod like a z axis and some like a more moderate action.

     

    Im gravitating to slower rods now. Its easier for me to feel glass and bamboo rods load. They have great tippet protection, and it's easy to cast in close with only a foot or two of line out. Plus when you hook a fish, they really bend and you feel every head shake.

     

    It would be good to head to a shop like fish tales and get them to line up a bunch of rods with different actions in your price range (they do carry some glass rods as well). Then try casting them at the distances you typically dry fly fish, which is really important. Go on a slower day and place some targets out or try to pick off some dandelions. There will be rods that just work better for you.

  2. On 5/5/2016 at 9:12 AM, Bron said:

    Guess you'll see how it casts into the wind She ugly out there today.

    What'd u do for bubble management?

    Thinning the epoxy helped to keep them down, and I used a straw to get out the big ones. Some guys use an alcohol lamp to heat the epoxy to remove them, however I was way too concerned to mix flame with alcohol thinner. The micro bubbles happened when I didn't let the epoxy wick off the brush. In the future I'm going get a faster motor for epoxy application. I found it hard to keep my hand steady and focus on only letting only the epoxy wick onto the blank while also turning the blank. A faster motor would also help get the epoxy lines straight at the ends of the wraps. I also think it would be a little bit easier to push epoxy around when applying it. 

  3. Finished up the rod this weekend. Ended up putting on 4 thinned coats of epoxy. Overall I'm very happy with the results

     

    Casting:

     

    Line used: SA GPX Line 6wt (used for majority of test)

    Also tried: Rio Indicator 6wt

    Reel: Hardy Golden Prince 7/8wt

     

    Its only been out to the neighborhood school field, but all I can say is WOW! The rod is accurate at typical fishing distances and really smooth. I brought a hoola hoop with me and I had the yarn landing on target most of the time. It casts nicely off the tip, however add a few hauls and the line just sails out of the guides. I have never been great at distance casting, but with this rod I almost had the backing knot through the guides. Not super practical for the fishing that I do, but it was really fun. I attribute the distance to the increased feel as it was easier for me to feel when to apply power. I have never had better looking loops.

     

    Overall:

    This was a great experience. There really is something to building your own rod, and I would recommend going the kit route to anyone that hasn't built a rod before. Almost everything that you need was included and the components fit very well together. There are a few moments that will be a little nerve wracking (any time epoxy is used), but it added to the experience. My only suggestion is to order so that it arrives in winter.

     

    I am going to head to the river tomorrow to see how it does on the water. The next question is what to build next.... a Steffen 3/4 or epic 476. Hopefully by next winter I know.

    • Like 7
  4. I wouldn't be AS concerned if dams were managed in a way that would allow reasonable flows of water throughout the summer. This new business of draining dams to prepare for flood season will put a lot if stress on fisheries like the bow unless we get some rain.

     

    I admit that I don't know about the new policies, however are snowpack and sustainable flows being factored in at all? Would love some more info on how decisions are being made.

  5. Its tough to get anything done having a two year old around. But I found some time over the past few weeks and built a rod dryer. I also made a practice rod to try some epoxy work on some rough wraps. I only put on one thinned coat. Here were the results:

    The practice rod was made from a glass rod driveway marker from home depot. Its quite a bit more white than my rod, however I didn't like how the natural silk wraps appeared yellow. Seeing the results, I changed one of the ferrule wraps that was natural silk color to match the guides.

    The first coat of thinned epoxy is on all the guides and the rod is in the dryer.

     

    I hope to have everything done by the weekend. Will post the final results when all is done.

    • Like 4
  6. I am about done half of the guides with the the black tipping. This is what it looks like:
    I like the contrast and it will match the reel seat.

    I didn't have any luck finding an old microwave, so I picked up a bbq rotisserie motor to build the rod dryer. Hopefully this weekend I can finish up with the wraps then start building the dryer.

  7. No I only wrapped up the guide feet. I had a good chunk of time to work on the rod yesterday and was able to start adding the natural silk colored tipping. I am hoping that the natural tipping will be almost invisible when the epoxy is applied. Once that is all done, I will add the next color of tipping which I am thinking about switching to black

    • Like 5
  8. Hi Matt,

     

    Good to hear that your building one out as well. If I like the 686, the 476 or a Steffen would be next on the list. Did you go 4pc or the new pack light 5pc? What color? It would be cool to see some pictures of your build so far.

     

    For a rod dryer I'm going to diy it. I'm going to try to find a used rotisserie motor of microwave turntable motor.

     

    I have 4 guides wrapped in grey so far and will try to find more time this week. I wish I could have bought it when it was -10 out. Any chunk of free time I have during the day is spent fishing.

  9. Yesterday I tracked down some silk for the thread wraps. The kit came both natural and black 100 wt silk. I wanted to use some color since the blank is white.

     

    Quality 100 wt silk can be hard to find, however a local quilting shop, 'Along Came Quilting', had a full selection of both 100 wt (thin) and 50 wt (thicker) Japanese silk from yli. Previously I had some shipped up from the states but it was nice to see the colors first hand.

    I ended up buying light grey and light orange silk. Each spool was around $7.00. A little pricey, however I can use any left over on flies.

    Here are the spools:

    I tried two different test wraps. The wrap on the left has orange and grey tipping and the other has natural and orange tipping. I think that I prefer the natural and orange. The natural will hopefully disappear leaving the orange tipping to stand out. My test wrap was on the second thickest rod section, and I anticipate some frustration when working on the tip section.

     

     

    • Like 1
  10. Thanks for the tip Colin, its good to know other options

     

    Last night I attached the grip and reel seat.

     

    The first step was to dry fit everything to determine how much of the blank needed to be sanded. I am really impressed with how well everything fits together right out the of the box. The grip is pre bored and perfectly matches the blank. The end of the grip was also ported for the reel seat and it matches perfectly. Nothing required any adjustment, just assemble and mark the blank.

     

    Next was to figure out the length of the reel seat and mark the blank

    The reel seat fits right over the but of the blank, which makes everything a lot easier. I didn't need to glue a stent into the blank. I used drywall fiberglass mesh tape to build up the arbor.

     

    The next step was to carefully apply the epoxy and slide everything together at let it set over night. As I said, Im quite impressed with how everything fits, A+

     

     

    • Like 5
  11. The denatured alcohol is for thinning the epoxy on the first application. If I couldn't find any, I was going to use acetone. Acetone is pretty toxic stuff and I wanted to avoid it if possible. I was able to pick up some ethyl alcohol (denatured alcohol) from petrocraft products off of memorial and barlow. It was $7.95 for 250 ml. They had a smaller container (~70 ml) but given how hard this was to track down, I decided to get the next size up.

     

    57008278-0fbf-4067-b231-e1d88893ea1a.jpg

  12. Started the build this weekend. The first step was to inspect the blank, no issues that I could see. Next was spining and marking the blank. One suggestion I found online was to use a piece of glass so that the blank rolls easily and doesn't dig into the surface your applying pressure to.

    Next was to mark the guide locations. This is where I have run into the first small snag on the build and I believe it is due to the recent switch from 3pc to 4pc. The guide placement chart that came with the rod states that the highlighted guide (the 6th) would be close to a ferrule. On my blank it does not. I checked with the online guide spacing chart and it's different than the one they sent. I believe it's the updated one, however I have contacted swift to find out.

     

    http://s650.photobucket.com/user/B_Line/media/A42D553F-A17F-4D23-B223-47AA6812619C.jpg.html]http://i650.photobucket.com/albums/uu229/B_Line/A42D553F-A17F-4D23-B223-47AA6812619C.jpg[/url]

     

    I have marked the blank based on the online guide and will change it if necessary.

     

    On the denatured alcohol search, I think I have tracked down a source (petrocraft products) and will go later this week. None of the drugstores I contacted carried it.

    • Like 1
  13. Still haven't had a chance to begin the build process, however I hope to get going this weekend. I haven't been totally idle, I have been gathering additional items for the build as well as re-reading the instructions.

     

    I needed to pick up some razor blades to cut the silk, some blue masking tape to place the guides, and get some denatured alcohol. I found everything but the denatured alcohol.

     

    The instructions say to get some from a drugstore, and not a hardware store as the hardware store varieties can be dyed. I checked my local shoppers drug mart and they don't have any so I'm still on the hunt.

     

    I also picked up a pack of colored china markers while at home depot. The marker that came shipped with the rod is white, which makes it hard to see on a white blank. It would work, however having more contrast will make things easier.

     

    As for some of the other comments, I believe that blanks that are trout sized are transparent, but still no word on their gender;) Their 8 wt and 12 wt rods may be a more solid color, but I don't know. Mine kind of glows when you put it in direct sunlight. See the image below of some other colors in the sun:

     

    http://www.headhuntersflyshop.com/wp-content/uploads/2015/07/epic_rods-1024x576.jpg

     

    As for the price of the blank, yeah they're expensive. When I started looking at these, our dollar was on par with the US, and I have been watching the price steadily increase. When I was originally looking, the kit price was about $475-$500. However I had to sell some fishing stuff before I could get one, so I had to wait until I had saved up;) They aren't as expensive as a Tom Morgan blank, but they are on the high side for glass. Carl designed the tapers and owns them and has a company called CTS make them in New Zealand.

     

    At the fishing show I took a hard look and cast a blue halo. Those blanks as roughly $100 USD less than an epic. The 5wt blue halo was quite soft, and I don't think it would be well suited for heavier nymphs and streamers. The only other option was the 7wt, which was a bit heavy, and I don't currently own any 7wt gear. I was drawn to the idea of making my own rod, so I never really considered a butterstick. However it is a lot of money to pay for something that you can potentially screw up. I'll be taking my time and hopefully all will go well.

     

    The closest graphite that I have cast might be a redington classic trout. I haven't cast one of those in a long time so I might be way off. I will have a better impression when it's fully built and I can actually cast a line. I'm not a real gear nut who has tried dozens of rods so I'm not the best guy to ask. I think that I have read the new orvis superfine glass 6wt may have a similar action to the epic, however I don't think shops like country pleasure stock the orvis glass rods.

  14. How is there warranty policy? Really nice looking glass. Can't wait to see finished pictures.

     

    It looks pretty standard. From their website: 'Every new Epic fly rod or blank that we produce is covered by our lifetime, original owner warranty. This warranty covers failure due to defects in material or workmanship of our product. Any Epic fly rod built by the Swift Fly Fishing company that fails due to misuse, negligence or normal wear-and-tear will be repaired or replaced at a nominal cost plus shipping at our discretion.' More info http://swiftflyfishing.com/pages/warrantees-and-returns

     

    I have heard of a few people breaking a tip through non-fishing related accidents (car door) and swift sent them a new tip section. No idea how much it cost.

×
×
  • Create New...