DJH Posted January 19, 2009 Share Posted January 19, 2009 I have a pair of breathable waders that are starting to leak around the crotch. Not from any hooks, thank goodness, just wear. Are there any good spray on sealants out there that a guy could spray on the inside that would make'im like new again? Thanks! Quote Link to comment Share on other sites More sharing options...
cheeler Posted January 19, 2009 Share Posted January 19, 2009 There's a Simms patch kit available at most places if you want to reinforce them - it comes with a small tube of Aquaseal, which can also be used on its own. I haven't seen anything that could be sprayed on. Quote Link to comment Share on other sites More sharing options...
Castuserraticus Posted January 19, 2009 Share Posted January 19, 2009 There are repair instructions on the Simms website. They provide instructions on how to locate leaks. Seams can be coated with aquaseal if that's where the leaks are. Also, I use layered method alternating aquaseal/reinforcing material/aquaseal to make really durable patches. I've used denim and nylon as the material. There is some additional bulk doing this. Patches do not breath. It's a small issue until the waders become more patch than original. Quote Link to comment Share on other sites More sharing options...
ÜberFly Posted January 19, 2009 Share Posted January 19, 2009 If you are using aquaseal, make sure you put it on the inside to avoid those ugly aquaseal smears on the outside ;-) P Quote Link to comment Share on other sites More sharing options...
TerryH Posted January 20, 2009 Share Posted January 20, 2009 If you are using aquaseal, make sure you put it on the inside to avoid those ugly aquaseal smears on the outside ;-) P I think those aquaseal smears give your waders character . Even if you don't agree with me on that, patching on the outside is somewhat better for the same reason it's better to patch a foundation leak from the outside. You want the hydrostatic pressure pushing the patch against the waders (outside) rather than trying to push the patch off the waders (inside). My 2 cents worth, Terry. Quote Link to comment Share on other sites More sharing options...
ÜberFly Posted January 20, 2009 Share Posted January 20, 2009 Yeah, you might be right Terry, but it looks god-awful (character or no character) I think those aquaseal smears give your waders character . Even if you don't agree with me on that, patching on the outside is somewhat better for the same reason it's better to patch a foundation leak from the outside. You want the hydrostatic pressure pushing the patch against the waders (outside) rather than trying to push the patch off the waders (inside). My 2 cents worth, Terry. Quote Link to comment Share on other sites More sharing options...
chiasson Posted January 20, 2009 Share Posted January 20, 2009 I can't think of any names at the moment, but there are a few gortex certified repair technicians in Calgary. I've seen work from a few of these people and it's all top notch, discrete patches that are very durable. Quote Link to comment Share on other sites More sharing options...
DJH Posted January 20, 2009 Author Share Posted January 20, 2009 Thanks for all the suggestions, I appreciate it! Quote Link to comment Share on other sites More sharing options...
LastBoyScout Posted January 21, 2009 Share Posted January 21, 2009 From my experience if the leak is from stretching like when you cross a fence or step out of a drift boat they could be screwed, its like trying to chase down seam leaks you cann't seem to get it all. Quote Link to comment Share on other sites More sharing options...
Simpson Posted February 3, 2009 Share Posted February 3, 2009 I think those aquaseal smears give your waders character . Terry. I agree Terry, battle scar's!! Something about weathered gear, it works better...as long as you were the one who weathered it! Quote Link to comment Share on other sites More sharing options...
Bowcane Posted February 3, 2009 Share Posted February 3, 2009 If they are Simms, do not repair seam leaks yourself! Send them back to them to repair them, otherwise you can just about toss your warrenty in the trash. Otherwise, I've had good luck by mixing Auqa-seal with tolene to make a more liquid paste (basically store bought flex-cement) and paint it on the suspect areas. You could also buy the flex-cement in those little bottles if you don't want a mini version of Sarnia Ontario on your residence! Tolene is very flammable, toxic, and I believe a possible carcinagen, mine is out in the garage. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.