LynnF Posted June 30, 2011 Share Posted June 30, 2011 Looking at taking down a load bearing wall and getting it reinforced to join 2 rooms. I think it's a structural engineer I need to tell me what I'd be looking at. Prefer to talk to someone that you've used or know well - kinda like my house standing and I need to be able to trust their advice. Thanks. Quote Link to comment Share on other sites More sharing options...
dube Posted July 3, 2011 Share Posted July 3, 2011 I would say you only need a structural engineer if you decide to use an engineered beam. Depending on how much wall you are taking out you may be able to use a built-up dimensional beam aka 2x10 or 2x12 say 3 or 4 plys. There are span charts that designate load capacity (max span) for built up beams. These charts are essentially carpenters gospel however once you get into engineered products the specs. must be stamped by an engineer, in other words a carpenter can't install an engineered beam unless it is engineered. The products are slick but more expensive and when you add in paying an eng. your costs go up dramatically. I would suggest contacting city licensing/bylaw/permit dept. and they could likely provide you with some useful information and you may require a permit anyway. Find a qualified carpenter which you will need anyway and there is a good chance you could save a a few hundred bucks and a lot of red tape. I realize that you are concerned about the job being done properly and not so much on cost but keep in mind that houses were built for a long time with actual wood without any engineering involved so consider this as 2 different options and I would focus on finding a good contractor first. A carpenters 2 cents. Quote Link to comment Share on other sites More sharing options...
Taco Posted July 4, 2011 Share Posted July 4, 2011 Carpenters are almost as cool as professional cattle hoof trimmers Quote Link to comment Share on other sites More sharing options...
dube Posted July 4, 2011 Share Posted July 4, 2011 Carpenters are almost as cool as professional cattle hoof trimmers not me....total nerd here. Quote Link to comment Share on other sites More sharing options...
LynnF Posted July 6, 2011 Author Share Posted July 6, 2011 Thanks Dube....I will have to take out a permit, so I might as well use their expertise and knowledge with this - never even thought of it. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.