angler
-
Posts
264 -
Joined
-
Last visited
-
Days Won
5
Content Type
Profiles
Forums
Events
Store
Posts posted by angler
-
-
5 hours ago, monger said:
Yes my sister and I used to watch Cahoon sit on the bank waiting for risers as we reeled in fish. Never understood why he was waiting. Finally old enough now to get the hunting part of fly fishing
There's a name I haven't heard in a long time. Spent may hours in CP when he, Jennings and McClennan ran it on 36 ST SW. First tying lessons with Rick Harding there as well.
Ahhhhhh...... memories.
-
-
YES!!!! I do this often on lakes I am somewhat familiar with. Motor up wind to where you want to start how it out, get your line out and go. I use the motor occasionally for direction changes - you know the wind changes as soon as get set up. As wind changes the sock is deployed and retrieved as needed.
And if you are looking for one I got one to part with. I didn't realize sizing so I bought one on-line only to find it is too big for my 12'er, almost 8 months after purchase with no option to return.
Let me . I'll send pic and price.
-
1 hour ago, Birddog said:
They are awful to deal with after sales.
Yeah Dave is a pain to contact and get action from. BUT when you can get his attention he does stand behind his products. Now may be a good time as all the spring trade shows are done. Pm me for his cell number if you need it. I found comments on his fb gets pretty instant reply. He has replaced the h frame and credited me the cost of the oars or rather SUP paddles he uses so I could buy proper OARS from outcast. A pain but came through in the end. Yeah it took almost 6 months of sometimes heated discussion, luckily only Sept to March so not much fish time lost.
-
Have you contacted Scadden?
-
It’s behaviour like this that leads to gates and no trespassing signs.
if you can carry it in full you sure as hell can carry it out empty. -
Yup. A hunting requires that you be able to identify critters. Fisherman need to know f a .
Make the course compulsory. No course no permit. Simple.
Caught without = a MEANINGFUL fine and ban for one year. Costa day ban increases exponentially for further infractions. 1 2 4 8 16 etc. -
Yes! Good news indeed.
A good friend works for AEP as a fisheries biologist. He called the other day to let me know that Dixon is all ears and WANTED the portfolio so he can do some good.
Lets hope. My opinion have been sent.
-
I've fished Whiteswan a handful of times. Always stay at Home Basin. Much nicer campground and more dog walking opportunities - and no logging trucks.
Yes the east end gets windy. Had one of my best days in a light gale. Motored out to beyond the drop off, pitch out a pumpkin head on an intermediate sink tip, and a drift sock and go with the flow back well onto the shallow flat. A fish a drift for nearly two hours.
I did motor down to the west end one day and did well in the trough.
Alces is a pretty little lake. Fish aren't huge but they sure know how to throw a hook. Often only land one in four. Not sure if they have fixed up the campground but it used to have very little shore access from the sites.
We'll be out there sometime in early June 2020.
-
Spent the morning on the Highwood. After a 20 minute hike downstream from the Highwood day use area near the park boundary I went to land a fish and no net.
Its a medium size Brodin I got as a gift nearly 40 years ago.
Unlikely anyone will find it as I was bush whacking some vow and game trails. Fished back to truck then spent the next 40 minutes trying to retrace my steps. Geez there a lot of small tracks heading every which way. Small reward on offer.
Oh, and I was calling out for Yogi as I walked.
-
1
-
-
36 minutes ago, McLeod said:
Let me chime on this.. A number of lakes in Banff National Park were closed in the summer of 2017 because of Whirling disease and the need to study whether the trout in these lakes have whirling or not. Fine I get that. However what I don't get is why Parks won't tell us anything on where they are at with studying the lakes or where they are headed in terms for the future. I have sent numerous requests for information but have received no responses. I guess it will requiring going to the top. My historical information also conflicts with Parks view on Marvel lake as I believe cutthroat were not native to the lake but parks now says they were. And then there is the issue with Birds and the transmittal of whirling...
And don’t forget that the long range plan is to end all fishing in the mountain parks. Every year they seem to chip away. More lakes closed. More areas closed to ALL human access.
Writing is on the wall. Just gotta look for it.
-
Following is a letter I sent to the owner of 4 Boys Mfg after a disastrous adventure relocating my loader from a 1997 to a 2019 Ford F250 dsl. The root cause is the shape and dimensions of the box rail of the 2017 and newer F250/350 Superduty trucks and 4 Boys failure to address the 'new' dimensions.
As expected,I have not heard a peep.
So, as far as 4 Boys is concerned - buy our product, The end.
It is unfortunate that Curtis is so unwilling to help' or even accept that their product, as configured, does not safely/securely mount to some vehicles.
It is also unfortunate that they are the ONLY option.
So, newer Ford truck owners beware! Contact me with my 'solution'.
April 16, 2019
4 Boys Mfg
11505 Three Forks Rd
Kelowna, BC V1P 1J8
To who it may concern
I’d like to make you aware of an issue with installing your base plates on the newer Ford Super duty pick up trucks.
I bought a new 2019 Superduty and ordered a topper, which my Ford dealer arranged through their preferred supplier, Cap It Calgary North.
As I am moving the loader from an older truck to this one, I organized a set of new plates for the new truck and met up with Curtis Cayer in Calgary.
A few days later I drove to Cap It Calgary North to pick up my topper and have them install the mounting plates to the box rail. Upon seeing the plates the installer indicated that there is not a safe, secure way to bolt the plates as they are about 2” too narrow (6” not 8”) for the front position. The box rail of 2017 and newer models is NOT a uniform width, but has significant curvature making it wider at the front than rear - 2” wider. Your plates, at 6”, necessitate moving the plates outward 2” to allow clearance for the loader legs, resulting in being unable to bolt through the folded lip where intended.
At this point I phoned Curtis and he vociferously indicted that they ‘should’ know what to do. He then suggested two possible options. One: to simply move the plates a little farther out and then bolt by accessing from the wheel well making use of a single thin sheet of aluminum. Discussion ensued about the strength of this single layer of aluminum and its’ propensity to crack with flexing and eventually fail. Two: make use of stake pocket inserts and one bolt (still accessed from the wheel well). In a later conversation he even suggested a couple of sheet metal screws, again into very thin aluminum.
Neither of these solutions were deemed safe and secure by the topper installer. So they phoned Curtis. Apparently their distributor also phoned him. A couple hours later, after being informed that the installer would not proceed, I called Curtis again and was thoroughly chastised that he’d received so many calls. He seemed perturbed by someone who was in need of guidance. An at times heated discussion ensued.
The installer suggested I get some stock welded onto the plate to give the needed width. I went home (Banff and the topper dealer is in Calgary) and attempted, unsuccessfully, to find a welder locally who seemed to have any time in their busy schedules.
Not being familiar with any special considerations with regards to aluminum, I also checked with my local auto body shop for some guidance. After looking at the construction of the box rail and the thinness of the material (they happened to have a box in the shop with the plastic rail caps removed making the ‘swiss cheese’ metal visible) it was strongly recommended that bolting through a single layer, as suggested by Curtis, NOT be done. Exacerbating the situation are the many ‘lightening’ voids in this metal. A copy of the pertinent page of the Ford parts catalogue showing the box rail is attached below. Is one, then, expected to ‘hope’ that they luckily manage to avoid these voids?
I later texted Curtis and he suggested I look at the Facebook page as there were numerous pictures with the loader on Fords with toppers. True enough. There are many nice pretty pictures showing the finished product. Not one of how it is actually attached. Curtis has repeatedly insisted that there are many such installations. Given what I now know I have to think every one of these is an accident waiting to happen.
Two weeks later I returned to the installer, who apparently thought that I would arrive with ‘modified’ plates, and after conversing for a while they checked with ’their’ welder in Medicine Hat. It was agreed that Cap It would send the parts and make this happen. Two days before I’m to return for the install I receive a call informing me that they ‘won’t do the welding for liability reasons’.
At this point I am understandably more than a bit aggravated. I call Curtis and we have a rather protracted and at times testy conversation. He essentially INSISTS that I go to his ‘preferred’ installer Cap It Calgary South, and again states that there ‘shouldn’t’ be an issue, that they ‘should’ know what to do. I asked for the name of someone (installer) who had successfully used the 6” brackets on these model trucks, so I could find out how they did it and get their opinion. Curtis refused, citing privacy. Not really pertinent as I was not wanting an individual but a ‘store/installer’. Does this indicate an unwillingness due to the fact that only DIY people follow his recommended methods and ‘professionals’ don’t. What other reason can there be for this refusal?
At one point in the conversation I asked what I was supposed to do with a $90,000 truck and $3000 boat loader I can’t use? His response ‘Well, it’s your decision if you want to park it’ WOW. He also stated that they (4 Boys) were not responsible for ensuring that their product can be safely installed because there are so many trucks and models, and that the plates ‘should’ work on all vehicles. Again using the word ‘should’. Should is not definite, but certainly implies the chance of maybe not. There is a big difference between ‘should’ and ‘will’. I find this sort of customer service to be insulting.
I made an appointment and went to his recommended installer on April 5. Pretty much as soon as this installer saw the plates he said “Don, they need to supply you with 8” wide plates. These will not work for these trucks.” He mentioned that they, in the past, had invited Curtis to their shop to ‘educate’ him on an issue, which indicates that he doesn’t know everything. He tried to call Curtis, but as of two hours later when I departed there had been no return call.
I spoke with the ‘preferred’ installer after Curtis returned his call. 4 Boys has no intention to do anything.
So, you have issues.
I now have two installers who have been unable to install the supplied plates and will not utilize either of Curtis’s ‘solutions’ and an auto body shop recommending against his other ‘solution’.
I ask again, what am I supposed to do? Or, rather, what are you going to do? It has now been six weeks since my first visit to have plates and topper installed. Two extra trips to Calgary, many hours of thought trying to come to a satisfactory and SAFE solution, and I am really no farther ahead.
As a side note, this situation has created significant animosity between myself, my Ford dealership and their topper/accessory supplier based on my believing Curtis over the original topper dealer and installer. Tension between two Calgary installers has also been escalated. I wouldn’t be surprised if there are some repercussions in the relationship between both of the topper dealers now involved and 4 Boys as well.
The courtesy of a prompt resolution by May 1, 2019, is expected and appreciated.
-
2 hours ago, bcubed said:
Figured it was more of a sign of this forum dying a prolonged death?
Yup. Too bad because I find the fb sites get overloaded with stuff I don’t give a **** about. I prefer the forums as easier to pick out the threads of interest.
-
Going to fish a bunch of new to me water ......... Don?
-
Yeah seems he’s found a way around the rules
hey moderators, maybe only registered users can past angling with a link to elsewhere.
Take a look at pacres history. He has NEVER posted ANYTHING except links to his blog.
-
2 hours ago, SilverDoctor said:
The volume of redirection posts to a certain Bloghas been huge. I will take steps to limit it as its getting to be like spam. See my rules post in Blog.
Thank you, but I see a new one AFTER you posted the ‘rules’.
Spam is exactly what it is. Unsolicited and unwelcome advertising.
IF he was an advertiser, maybe, but still way too many to not be irritating.
-
1 hour ago, SilverDoctor said:
Post more?
?
-
Sorry guys.
when I search unread content about all I see is whole bunch of blogs from pacres.
i don’t give a damn about anybodies blog and having to scroll past them all is a pita.
How do I select to ignore ALL of these so they never show up.
-
2
-
-
Why not take drive to HYDE early in the spring?. I did it a few years ago. No charge and they lent me a boat for a day and floated a short bit of Henry’s Fork. Caught the salmon fly hatch. A great day.
Heck I might even go with you.
-
Perch and sunfish, two of the tastiest of fish. No work to eat. Smaller ones- head off, guts out, skin. Dip in egg and flour, fry, stand on rib cage and peel the meat off the carcass. No bones. Larger ones, filet.
-
Pondering a vhf radio as I'll be spending more time on AB and BC forestry roads the next while.
I see relatively few able to transmit above 150 which is where the RR channels reside.
I have found these https://www.amazon.ca/TYT-Vehicle-Mounted-Handheld-Transceiver-136-174MHz/dp/B00IYAX9R4/ref=sr_1_3?ie=UTF8&qid=1537374700&sr=8-3&keywords=vhf+radio+tyt and https://www.aliexpress.com/item/TYT-TH-9800-Pro-50W-809CH-Quad-Band-Repeater-Car-Truck-Ham-Radio-Transceiver/32401346667.html?spm=2114.search0104.3.17.e285401egY7eNg&ws_ab_test=searchweb0_0,searchweb201602_1_10065_10068_10130_10547_10059_10884_10548_10887_10696_100031_10084_10083_10103_10618_10139_10307,searchweb201603_54,ppcSwitch_5&algo_expid=8460fb92-e2cb-4d84-8a03-40449047f170-2&algo_pvid=8460fb92-e2cb-4d84-8a03-40449047f170&priceBeautifyAB=0
-
Metz or Whiting. Whatever $ you can justify. You buy cheap and very shortly you'll be disappointed and buy the good stuff anyway.
Check any of the local fly shops. They need you business.
Check with Dave or Nancy at Fishtales. You won't go wrong.
If you're just getting started, be prepared for a surprising 'investment' in tools and materials. I now have a 4 drawer desk/dresser and all 4 are FULL. And I don't even tie that much.
Have fun.
-
You might even try at the weigh scale / boat inspection station just east of the turn to 507.
-
1
-
-
Don, yup noticed the same the week after opening. Raggedy Ass Road was empty. Zilch. Nada. Love it.
I did see a few of quads. We were interviewed on-water by a couple 'kids' form ACA I think about fishing, our gear, our boots, if we knew about the clean drain dry initiative etc.
We asked about the OHVs and told new only a few days prior so they were expecting some 'failure to comply'.
The 4 guys I saw down a track - with truck, trailer and another truck with quads off-loaded were a bit 'rough' for an old fart accompanied by wife and dog to try to 'edumacate'.
I'd personally love to see OHVs banned province wide, for recreational purposes. Need for work (surveyors etc) or farm, fine. Except, of course, for 'purpose built' OHV 'parks' where anything goes. Ya wanna get dirty, there's the place for that.
-
5
-
Abysmal customer service from 4 Boys - Superduty owners beware
in General Chat - Not Fishing Related (NFR)
Posted
To what end?
Curtis is long gone. Hopefully never to be heard of again.
4 Boys has been sold (as far as I know).
So more aggravation for???????