usie33 Posted May 3, 2010 Posted May 3, 2010 hello all i am wondering if anyone could help me out, im just wondering how to get the black plastic cover off of where the bearings are so i can clean them and re-grease. i was going to try channel locks but i am not sure and dont feel like breaking anything. Quote
headscan Posted May 4, 2010 Posted May 4, 2010 Tried emailing Amundson? The other option would be to send one of the Amundson folks who post here a pm. I think there's Jack, brunsie and ladystrange. Quote
jack Posted May 4, 2010 Posted May 4, 2010 Tried emailing Amundson? The other option would be to send one of the Amundson folks who post here a pm. I think there's Jack, brunsie and ladystrange. The black plastic cover turns and just slips off. BUT You don't need to remove it. All that does is cover the disc drag. You need to oil the bearing on the centre hub shaft by just putting a drop of synthetic reel oil around the edge of the bearing at the shaft at the centre of the black covr. Where you want to grease is the one way bearing inside the spool. j Quote
usie33 Posted May 4, 2010 Author Posted May 4, 2010 i have greased the reel and she seems to be smooth. thanks for the help everyone. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.